What extraction actually does
A video file holds two separate streams side by side: the picture and the sound. Extracting audio drops the picture stream and writes the sound into an audio file. No picture is processed, so it finishes far sooner than converting video does.
One thing to know: this converter re-encodes the sound into the format you choose instead of copying it bit for bit. For listening, the difference is inaudible at sensible settings. If you plan to edit the audio and export it again, choose a lossless format so you do not stack one lossy encode on another. The audio formats guide explains the families in detail.
Pick the format by what happens next
| You want to | Choose | Why |
|---|---|---|
| Listen on a phone, in a car, anywhere | MP3 | Plays on everything ever made |
| Keep it in an Apple library | M4A | AAC sounds slightly better than MP3 at the same bitrate |
| Edit it in an audio or video editor | WAV | Uncompressed, so editing adds no further loss |
| Archive it at full quality in less space | FLAC | Lossless at roughly half the size of WAV |
Why 320 kbps is usually wasted
The sound inside most videos is already compressed, typically AAC at somewhere between 128 and 192 kbps. Encoding that to a 320 kbps MP3 cannot restore detail that was discarded when the video was made. It only produces a bigger file with the same sound. A higher number feels safer, but the ceiling was set by the source.
- Speech (lectures, meetings, interviews): 128 kbps is more than enough.
- Music from a typical video: 192 kbps matches what the source can offer.
- Music from a high quality source you recorded yourself: 256 or 320 kbps, or go lossless.
How big will the file be?
For MP3 and M4A, size depends only on bitrate and length, so it can be worked out in advance.
| Setting | 10 minutes | 1 hour | 2 hours |
|---|---|---|---|
| 128 kbps | 9.6 MB | 58 MB | 115 MB |
| 192 kbps | 14.4 MB | 86 MB | 173 MB |
| 256 kbps | 19.2 MB | 115 MB | 230 MB |
| 320 kbps | 24 MB | 144 MB | 288 MB |
| WAV | 115 MB | 691 MB | 1.4 GB |
The WAV row is the reason not to pick it by default. It is the right choice for editing and a poor one for a two-hour lecture you only want to hear once.
Doing it
- Open Video to Audio and add the video. It stays on your device; nothing is uploaded, which matters for recordings of meetings and classes.
- Choose the audio format. The converter notes that the video's audio track will be extracted.
- Set Bitrate using the list above.
- If you only need part of it, open Trim / cut and enter the start and end times.
- Convert and download.
Two problems people run into
The recording is too quiet. Lecture halls and meeting rooms produce quiet recordings. The Volume control amplifies above 100%. Raise it in modest steps, because pushing loud moments past the maximum makes them distort, and that cannot be undone afterwards.
The video is very large. The whole file is loaded into memory before the sound can be pulled out, so a multi-gigabyte recording may fail in a browser even though the audio you want is small. Recording at a lower resolution next time, or using a desktop tool for that one file, gets around it.
A last point that is easy to forget: extract audio only from recordings you made or have permission to use. A lecturer's or performer's rights do not disappear when the picture does.